Epson Stylus Photo 1500W Support Page

Video Description

This video demonstrates how to unblock a blocked printer head.

A blocked printer head is when Ink dries on a print head. Do not run multiple cleans as this in fact makes it worse, as even more ink dries out and wastes ink!

Magic Bullet breaks ink particles down.
Directions as shown in video -
1 - Remove Cartridges and Power Cable
2 - Place a paper towel under head
3 - Use syringe to insert Magic Bullet into ink exit ports
4 - Replace Cartridges - Perform Nozzle Check

Purchase Magic Bullet Printhead Cleaner below: 20% off RRP

Video Description

A printer can sometimes become blocked under the head.

Directions as shown in video -
1 - Cut a cloth approx 50mm x 300mm
2 - Mover carriage across, place the cloth under head
3 - Lay cloth on platen, pull head across
4 - Draw Magic Bullet, apply on each side of cloth
5 - Pull the cloth back and forth for 10 seconds
6 - Repeat process until perfect Nozzle Check

Purchase Magic Bullet Printhead Cleaner below: 20% off RRP

Video Description

How to Drill out Epson Inkjet Spigots with Micro Drill

Often the simple reason that you lose a complete colour channel on your inkjet printer is because the inkjet spigot that pierces the ink cartridge is blocked. Simply drill out the affected spigot with the correct size Micro Drill - purchase below...

Purchase Inkjet Spigot Micro Drill below: